Yongnuo RF-603 II Wireless Flash Trigger Set for Canon, Nikon

Yongnuo RF-603 II Wireless Flash Trigger Set for Canon, Nikon

The new RF-603 II is improved version of RF-603, it is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item.

The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.

A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. The pictures below just show one of the two sets.

Improved features:

1. Hot shoe locking system to prevent from slipping off
2. Switch on side for easy operation
3. Enhanced self-detecting system
Features

1. Works as a wireless shutter release control

Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported
Depending on the camera model a special shutter release cable is included in the package 
2. Transceiver based system - works as a wireless flash trigger and receiver

Each RF-603 is designed to work as trigger and as receiver. The unit automatically detects the mode it should work in. You have the full flexibility out of your gear.
As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver. 
Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. In the latter case you are free to mount an additional flash top-camera.
One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers.
3. Wireless trigger studio flash

Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Specification (each item)

Type: FSK 2.4GHz wireless remote system

Transmitter Distance: 100m

Channel: 15 different channels and all channels

Release: Half-way press, full-way press

Transmitter Port: PC Sync

Receiver Port: PC Sync, 2.5mm for shutter release

Time of shooting: Up to 20000 times

Receiver stand-by time: Up to 45 hours (using AAA batteries)

Dimensions: 37mm x 30mm x 81.5mm

Weight: 150g

Compatible Cameras

C1 version:
---Canon 1100D / 1000D / 600D / 550D / 500D / 450D / 400D / 350D / 300D / 60D/70D

C3 Version:
---Canon EOS 7D, 50D, 40D, 30D, 5D, 20D, 10D, 5D Mark II, 5D Mark III, 1D X, 1D Mark IV, 1Ds Mark III, 1D Mark IIII, 1D Mark II N, 1Ds Mark II, 1D Mark II.D

N1 Version:
---D3X / D3 / D700 / D300 / D2X / D2H / D200 / D1H / D1X / 
---N90s / F5 / F6 / F100
---Fuji Film: S5 Pro / S3 Pro
---Kodak: DSC-14N

N3 Version:
--- Nikon D90 D5000 D5100 D7000 D3100

Compatible Flashes

Nearly all flashes with a standard hot shoe and being released by the middle contact are compatible
Please note that the RF-603 only supports the manual flash mode, not TTL, but it works with TTL flashes
Supports the "sleep mode" or "wake up" mode which some flashes are equipped with
Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX
Nikon SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24
Not compatible with Nikon SB-600
Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
Olympus FL-50, FL36
Fuji Film：S3Pro / S5pro
Metz
Nissin, only newer models are compatible, please check before purchase
Sigma EF-500 DG Super, EF-500 DG ST, EF-430
Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D
Vivitar 285HV
Yongnuo YN460, YN462, YN465, YN467, YN468, YN560

Not compatible to Sony/Minolta flashes

Package Content

2 x Transceivers
1 x Shutter release cable (C3 or C1)
1 x User manual in Chinese and English